To configure your IP phone, you will need a computer (to access the web based configuration).

Once your IP phone has been connected to your internet router (or network switch)...

  1. Find the IP address of the Grandstream phone by pressing the ^ (UP arrow) key.

    The IP address on the phone will be listed next to "IPv4 Address: "
    ie: 192.168.0.22


  2. Enter the IP address found in Step 1 as a URL using a web browser on your PC. 
        The URL may look like: https://192.168.0.22


  3. You will be prompted for a username and password. 
    You will require administrator access to your Grandstream phone, in order to configure the service details.

     The access details are:
    • Username: admin
    • Password: admin


    You should see the Account Status screen once you login.


  4. On the top menu, select Account and select the Account # you wish to configure, then General Settings.



  5. Have your VoIP Much account details ready...
    These are available in your account setup notification email and also under Device Setup in the User Portal.

    Click Save.


  6. From the left menu select Network Settings (for the Account you are setting up).


    Click Save


  7. From the left menu select SIP Settings, then Basic Settings (for the account you are settings up):


    Click Save.


  8. From the left menu, under SIP Settings, select Security Settings (for the account you are setting up):


    Click Save.


  9. From the left menu, select Feature Codes (for the account you are setting up):


    Click Save


  10. From the top menu, select Settings, then General Settings:



  11. In Settings, General Settings, set the following:


    Click Save.


  12. From the top menu, select Network, then Basic Settings:



  13. In Network, Basic Settings, set the following:

    Click Save.


  14. From the top menu, select Maintenance, then Upgrade and Provisioning:



  15. OPTIONAL (recommended, to ensure you receive firmware updates)
    From Upgrade and Provisioning, set the following:


    ...

    The below firmware server path is: config.voipmuch.com/grandstream/0

    Click Save


  16. From the top of the page, click APPLY.



    Done!